WATTECO Video Tutorials
WATTECO sensors video guides
On this page we provide you with video instructions for our sensors so that you can start and install them easily.
How to start the LED / ON-OFF sensors
Led sensors*
ON: Place the magnet on the "ILS" label for more than 1 second. In return, the red LED flashes rapidly. Remove the magnet. As soon as the green LED flashes, your sensor is searching for association to the network. When the green LED stays on for 3 seconds, the sensor has successfully associated with the network.
OFF: Place the magnet on the "ILS" label for more than 5 seconds. In return, the red LED flashes rapidly, then 5 times slowly. When the LED no longer lights up, the sensor is switched off.
*The sensors concerned: In'O, Pulse Sens'O, Toran'O AtEx, Pulse sens'O AtEx, Modbus, Outdoor T°C, PT 1000, RT 1 CTN, RT 2 CTN, Remote THR, Ventil'O, Flash'O: the LEDs can be placed differently.
See Quick Start Guide p1
Vaqa'O & temperature and humidity sensors
ON: Place the magnet on the "ILS" label for more than 1 second. In return, the red LED flashes rapidly. Remove the magnet. As soon as the green LED flashes, your sensor is searching for a network association. When the green LED stays on for 3 seconds, the sensor has successfully associated with the network.
OFF: Place the magnet on the "ILS" label for more than 5 seconds. In return, the red LED flashes quickly, then 5 times slowly. When the LED no longer lights up, the sensor is switched off.
How to start the sensors with Buzzer / ON-OFF
How to start Intens'O
ON /OFF
ON: Place the magnet on the "ILS" label for more than 1 second. In return, the buzzer will sound quickly. Remove the magnet, as soon as you hear a higher pitched sound. Your sensor is seeking association with the network if it likes high pitched, spaced out sounds. When you hear a melody, the sensor has successfully associated with the network.
OFF: Place the magnet on the "ILS" label for more than 5 seconds. In return, the buzzer will sound rapidly. When the sound becomes different from the buzzer, the sensor is switched off.
How to start Monit'O - Press'O - Press'O +
ON /OFF
ON: Place the magnet on the "ILS" label for more than 1 second. In return, the buzzer will sound quickly. Remove the magnet, as soon as you hear a higher pitched sound. Your sensor is seeking association with the network if it likes high pitched, spaced out sounds. When you hear a melody, the sensor has successfully associated with the network.
OFF: Place the magnet on the "ILS" label for more than 5 seconds. In return, the buzzer will sound rapidly. When the sound becomes different from the buzzer, the sensor is switched off.
How to start Netw'O
ON /OFF
ON: Press the central button for more than 1 second. In return, the buzzer will sound quickly. Remove your finger, as soon as you hear a higher pitched sound. Your sensor is looking for association with the network if it likes high-pitched and spaced sounds. When you hear a melody, the sensor has successfully associated with the network.
OFF: Press the middle button for more than 5 seconds. In return, the buzzer will sound rapidly. When the sound becomes different from the buzzer, the sensor is switched off.